Slayer Carbon 50

The 2023 Slayer IS Mullet compatible. Both the size Small and Medium come as muller where as the Large and XL come as 29".

The max axle to crown length is 601.9mm. The Slayer was designed around a 180mm travel 44mm offset fork.

The Slayer is designed to fit up to a 29" x 2.5" tires or 27.5" x 2.5 " tires for a mullet set up. We recommend 6 mm of clearance between the tires and any frame members.

The spindle lengths that are compatible with the Slayer are the Race Face RF134-136, SRAM Boost, or the Shimano Boost. The Slayer has a 55mm chainline for Shimano, Sram and Raceface

The Slayer needs a Press Fit BB92 or PF41 bottom bracket, meaning that it's 92mm wide with a 41mm diameter shell. Any other bottom bracket standard is not compatible with this frame.

The Slayer has 200mm 2-postion brake mounts. It will fit up to a 223mm rotor with a 23mm adapter.

The Slayer uses a 12mm x 173mm with a 1mm thread pitch.

The Slayer uses a Zero Stack headset: ZS44|ZS56.

The maximum chainring size that’s compatible is a 36t. The maximum oval chainring size that’s compatible is a 34t.

The Slayer uses a 230 mm x 65 mm length shock. The forward shock hardware is a 25mm x 8mm ID pin and reducers, and the rear shock mount uses our bearing eyelet hardware.

The Slayer has the 2 lower ISCG05 tabs and is compatible with 2-bolt bash guards.

The Slayer uses a 34.9mm seat post collar.

The slayer uses a 30.9mm seatpost.

We recommend running 30-35% sag for the rear shock and 15-20% for the fork on the Slayer.

Slayer carbon: Size S = 245mm, Size M = 265mm, Size L = 285mm, Size XL = 305mm
Slayer alloy: Size S = 240mm, Size M = 270mm, Size L = 272mm, Size XL = mm