Altitude (2021-2023)

The SM frame is equipped with 27.5” wheels front and back. The MD, LG, and XL frames are equipped with 29” wheels front and back, and they are also MX (Mullet) compatible.

LC2R™ (Low Centre Counter Rotating) is our unique take on a virtual pivot suspension design, delivering a smooth and predictable ride on challenging terrain. The LC2R™ delivers ride characteristics that balance kinematic variables to achieve the legendary Rocky Mountain ride feel riders have come to love

The forward shock hardware is a 40 x 10mm ID pin and reducers.

Both the Alloy and Carbon versions of the Altitude require a 30.9mm diameter seat post.

The Altitude uses a 12mm x 148mm rear hub. The total axle length is 173mm, with a 1.0 thread pitch.

Dropper post length depends on your saddle height and the maximum seatpost insertion depth which you’ll find in the user manual.

The Altitude is compatible with forks up to 170mm in travel.

These measurements are using the OEM Installed Chainring.

SM = 32T | 116L
MD = 32T | 118L118L
LG - XL = 32T | 120L

The chainline range for the Altitude is: 52 - 55mm

The maximum chainring size is 34T and the minimum is 30.

Yes, all frames are equipped with reach adjust headsets to fine tune the reach with 3 positions (short, center, long).

Altitude Carbon: No.85-1 0mm Offset Headset, complete

Altitude Alloy: RMB ZS56|66 0mm Offset Headset, complete
Headset Cup Set 1194004 RMB Upper ZS56 | 5mm Offset Cup Set

The fork offset is 37mm offset.

The Altitude needs a BSA 73 Threaded bottom bracket, meaning that it's 73mm wide and uses English type threads.